This is an old revision of the document!
Table of Contents
FE LUMI measurements
Channel scan at high gain at typical biasing up to 50fC - 03.12.2013/13.05.2014
Measurements data - https://asic.fis.agh.edu.pl/data/lumi_data/default_channel_scan/ (use your Lumifun Websvn login)
Charge gain
= = = =
Baseline
Peaking Time
Linear range
ENC
Scan info:
LUMI FE measurement - performed 2013-12-03_16-44-10
Run id=0000086-93
FE channel=0-7
Detector capacitance Cdet=10.0 [pF]
Test input used=Yes
Averages for pulse measurement=16384
Statistic for noise measurement=2500
Test pulse input divider=10
### FIXED parameters
Current ipre=-13.500 [uA]
Voltage vpout=0.000 [V]
Current ish=-10.000 [uA]
Voltage vcm=0.600 [V]
Voltage vdda=1.200 [V]
### SCAN parameters
### Qin parameters
Qin scan from 0.500 to 50.000 with step 0.500 [fC]
Finished 2013-12-03_17-23-43
Generated by SALT measurement software K.M.2013
Example pulses
Channel=3, Qin=4fC=1MIP
Channel=3, Qin=40fC=10MIP
